Lx5 Insulators of Tulsa can damage a roof, ceilings below, and even wood structures in the house. It can cause ice dams, water stains, peeling paint and mildew. The best way to prevent moisture infiltration is to ward it off at the source. Ideally, this means controlling humidity in the living spaces as well as insuring adequate insulation and ventilation.

A major source of moisture in the attic is condensation. This occurs when warm air rises and meets the cold underside of a roof deck, causing water to form. If not controlled, attic condensation can lead to rotting and mold in the attic and in the living space below.

Essential Insulation Safety Practices

The best way to control attic condensation is to monitor indoor humidity and insure that kitchen ranges, bathroom exhaust fans, and dryer vents are properly vented outside. Good attic insulation and ventilation also help to minimize condensation problems.

Ensure that attic and soffit vents are open to allow air to flow through the attic space. Insulation often blocks these vents, especially if it was installed in the DIY fashion. Installing attic vent baffles may be needed to facilitate airflow.

Air sealing can greatly reduce attic condensation by keeping the warmer, moist indoor air inside the home and preventing it from seeping into the attic. An attic fan can also reduce attic condensation by moving the hot air and moisture out of the attic before it can cool down and condense. In both cases, it is important to work with a qualified professional to insure that the right solutions are implemented for your home and climate.

Lx5 Insulators of Tulsa
3139 N Lewis Ave Tulsa OK 74110
(918) 626-0327